10元可提现的棋牌

  • <input id="50n5g"><label id="50n5g"></label></input>
  • <var id="50n5g"></var>
      1. <input id="50n5g"><strike id="50n5g"><legend id="50n5g"></legend></strike></input>
            1. <table id="50n5g"><code id="50n5g"></code></table>
            2. <table id="50n5g"></table>
            3. Drafting systems for worsted ring spinning

              PK 6000 weighting arms
              This may be also of interest to you
              Contact us
              Texparts PK 1660

              PK 1660 weighting arms

              The solution for worsted yarn ring spinning

              Texparts PK 1600 series arms have long been the industry standard for worsted yarn spinning. In the development of PK 1660 focus was set on increasing customer benefits in both handling and lifetime. This ensures improved process reliability which results in optimum quality yarn.

              PK 1660 weighting arms are mainly intended for 3-roller double-apron drafting systems on worsted ring spinning machines. They are suitable for spinning wool or man-made fibers or blends of both types up to approx. 200 mm length.

              Available gauges: 75 / 82,5 / 90 /100 mm

              Advantages

              • Optimized surface protection
              • Smaller load tolerances
              • Visible load indicators
              • Ergonomic handle
              • Easy disassembling of top rollers
              Texparts components for PK 1660
              Rear and front top rollers without cots*
              Ref. nos. Gauge (mm) Boss width (mm)
              LP 1014-1253 740  75.0 34.0
              LP 1014-1253 741 82.5 34.0
              LP 1014-1253 742 90.0 34.0
              Apron top rollers without cots*
              LP 1016-1256 711 75.0 34.0
              LP 1017-1256 712 82.5 40.0
              Top apron cradle
              Ref. nos. Gauge (mm) Top rollers
              OH 2402-1253 436 75.0 LP 1016
              OH 2402-1253 437 82.5 LP 1017

               

              * Cot quality to be decided by customer

              Tabelle anzeigen
              Texparts PK6000

              PK 6000 weighting arms

              Excellent quality for long-staple ringspinning machines.

              The Weighting arm Texparts PK 6000 is with individual pneumatic loading of the top rollers. The Texparts PK 6000 is simple to assemble.

              Its fasteners are easily accessible. The height can be adjusted and controlled easily and quickly with simple gauges. The draft field setting is referred to the front bottom roller. That gives more time for other jobs.

              Available gauges: 75 / 82,5 mm

              Application

              The fully pneumatic weighting arm. Three-roller double-apron drafting systems on worsted ring spinning machines. Suitable for spinning wool, man-made fibres or blends of both types up to 200 mm fibre length.

              Advantages

              • Excellent spinning results
              • Constant weighting load from spindle to spindle
              • Centralized and infinite setting pressures
              • Centralized setting of partial load
              • Easy setting
              • Easy handling
              • Top apron cradle concept with individual tensioning system

              Technical information

              A comprehensive safety concept based on three steps:

              1. Detecting: Pneumatic unit
              2. Finding: The individual flow indicator on the arm permits dependable checking of each arm and rapid location of possible leakage in it
              3. Rectifying: Short time required (approx. 1 minute)

              A pressure monitor ensures that the ring spinning machine is secured against dropping out of air pressure below the limit of 3 bar.

              Texparts components for PK 6000
              Rear and front top rollers without cots*
              Ref. nos. Gauge (mm) Boss width (mm)
              LP 1014-1253 740  75.0 34.0
              LP 1014-1253 741 82.5 34.0
              Apron top rollers without cots*
              LP 1014-1253 740 75.0 34.0
              LP 1015-1253 744 82.5 40.0
              Top apron cradle
              Ref. nos. Gauge (mm) Top rollers
              OH 6022-1254 311 75.0 LP 1014
              OH 6022-1254 312 82.5 LP 1015

               

              * Cot quality to be decided by customer

              Tabelle anzeigen

              Contact us

              Should you have questions about our products or require additional guidance, kindly get in touch with your local contact person. As your partner, we pride ourselves in providing expert and swift support.

               

              loader

              Copyright © 2019.10元可提现的棋牌 All rights reserved.www.cnjuzi.com

              赌博app下载| 850游戏棋牌| 666棋牌APP| 五星棋牌游戏| 赌博网址大全